Paper cutter operation is relatively simple, the environmental requirements are not high. Usually in the general office of the power supply to ensure that power can work. General Cutter with automatic switching system, as long as the enemy in the paper lost input, the cutter will automatically rotate the paper shredded. Some cutters need to press the start button, the cutter will rotate, you can continue cutting. After shredding is completed, press the stop / reverse key to stop the cutter.
Shredded paper should be checked before the paper to be broken whether there are paper clips, staples and other hard objects. If so, it should be removed into the paper mouth, or it may damage the tool. When using the paper cutter, should pay attention to an unmanned paper too much, especially the better quality paper, pay attention to when using, so as to avoid jams when the paper into try not to put askew, the relatively narrow Paper should be placed in the center of the paper inlet.
For early products, in the event of a jam, you should press the back button or down button, so that broken pieces can continue to use. Cutters are equipped with overload power protection device, when the motor overload fever, it will automatically shut down. At this time should stop using 20 a 30min, the motor cooling. At the same time, re-use should consider appropriate to reduce the number of input paper. More advanced cutter once overloaded automatically stop, automatically eject the paper, the use of more convenient. When the paper machine box is full, some machines will automatically make a sound to remind people to promptly remove the paper dust.